Grandstream HandyTone is an “All-In-1” VoIP IAD based on SIPstandard. Built upon Grandstream’s innovative technology，HandyTone features superb. Grandstream HandyTone is a multi-port, all-in-one Analog telephone adapter. It has one RJ11 FXS port(Telephone device), one RJ11 FXO port(Phone line). Grandstream Handytone Setup Guide. Grandstream Handytone ATA; Grandstream Handytone ATA; Grandstream Handytone ATA; Grandstream.
|Country:||Saint Kitts and Nevis|
|Published (Last):||3 September 2013|
|PDF File Size:||1.64 Mb|
|ePub File Size:||18.33 Mb|
|Price:||Free* [*Free Regsitration Required]|
Asterisk News Archives older news. Sending Fax from Zoiper to Zoiper using T.
The configuration page should appear. For example IP address: You should see the following login screen: Check these configuration instructions before continuing.
HT | Grandstream Networks
This value will change the default admin that was used to access the phone menu in step 2 above. It also supports different codecs: Select dynamically assigned via DHCP from the items below: Introduction Grandstream HandyTone is a multi-port, all-in-one Analog telephone adapter. On the first screenshot of ” Basic Grandsteam look belowyou can change the End user password account: If you are in static IP mode you can change the address.
It handyotne a 12 digits HEX number located on the bottom side of the unit.
Grandstream HandyTone 488
Dial 02 and you should hear the IP Address. Enter 9 to confirm the reset, or enter the MAC address to restore factory settings.
Type in the default password admin and press Login. Grandstream Handytone Setup Make use of our Grandstream automated setup facility.
Handytoje Admin Password to a personal value. Update the firmware of your Grandstream device to the recommended firmware version. Handytone users Handytone must be plugged into the LAN and connected to an analogue phone press the button on the Handytone, you should hear a menu prompt announcement on your analogue phone.
I do apartcipee the writing. Please disconnect network cable and power cycle the unit before trying to reset the unit to factory defaults. To do this, just enter 12 digits for the new IP address. Type the web address into a web browser on a local PC. When booting the phone for the first time, please allow for minutes booting time as the phone might be automatically downloading and installing a new version of the firmware.
The device will reboot automatically and restore to factory default settings.
The phone’s IP Address should graandstream on the phone’s screen. Insert a standard RJ11 telephone cable into the LINE port and connect the other end of the telephone cable to a wall jack.
This is not a mandatory step but we do recommend that you change the password.
Grandstream Handytone Setup
Let say, we want to enter for static IP address Insert the power adapter into the HandyTone and connect it to a wall outlet. In order to prevent automatic posting on our website, hamdytone kindly request you to type in the number you see in the picture below. Upon rebooting, your phone should have connected to the VoIPtalk service.
The instructions are listed above. So we have to press: Find the MAC Address of the device.