Workshop manual. English. XP. For Husqvarna Parts Call or Workshop manual. 90 , , XP, For Husqvarna Parts Call or XP, XPG, Xp E-tech, XPG E-tech, , G, E-tech, G E- tech, TrioBrake. Please read the operator’s manual carefully and make sure.
|Published (Last):||28 May 2006|
|PDF File Size:||5.36 Mb|
|ePub File Size:||5.71 Mb|
|Price:||Free* [*Free Regsitration Required]|
The saw is supplied from the factory with the screw set to position 2.
Husqvarna 346XP Operator’s Manual
The chain brake reduces the risk of accidents, but only You can prevent them. Careless or incorrect use can result in serious or fatal injury to the operator or others. To print the manuxl completely, please, download it. Page 12 2 Sharpening your chain and adjusting raker clearance The risk of kickback is increased with a badly sharpened chain!
Winter use – Husqvarna XP E-tech User Manual – Page 37 of 44 |
A damaged air filter must always be replaced. A blocked mesh will hussqvarna the husqgarna to overheat and may lead to serious Page 22 C Clearing the trunk and preparing your retreat Remove any branches that are in the way.
When you buy any of our products we guarantee the availability of professional repairs and service. Table Of Contents Long term inhalation of the engine’s exhaust fumes, chain oil mist and dust from sawdust can represent a health risk.
This results in damage to the oil pump, the bar and the chain.
Always use special chain oil with good adhesive characteristics. First adjust the L-jet, then the idling screw T and then the H-jet. If any binding occurs, or if engine fails to return to idle, the saw should be taken to your dealer, before it is used again.
A Husqvarna chain saw can be equipped with different types of airfilter according to working and weather conditions, season etc. C Clearing the trunk and preparing your retreat Remove any branches that are in the way. Husqvarna Workshop Manual 50 pages.
Kickback is usually quite mild, but it can sometimes be very sudden and violent. Throttle Lock 2 Throttle lock Make sure the throttle control is locked at the idle setting when you release the husvarna lock. The way the chain brake is triggered, either manually or automatically, depends on the force of the kickback and the position of the chain saw in relation to the object that the maanual zone of the bar strikes.
Husqvarna XP User Manual | 36 pages
Press the husqvwrna lock and make sure it returns to its original position when you release it. The only way to avoid kickback is to make sure that the kick- back zone of the bar never touches anything. Never limb above shoulder height. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Aim the tip of the saw at a light coloured surface about 20 cm away.
Adjustments are made by turning the screw using a screwdriver or combination spanner. Enter text from picture: This manual also for: Basic Cutting Technique Before moving your chain saw switch off the engine and lock the chain using the chain brake. Check that the throttle control and throttle lock move freely and that the return springs work Otherwise the clutch can come loose and cause personal injuries.
Don’t have an account? Tree Felling Technique 2 The log is supported at one end.
Husqvarna 346XP 351 User Manual
If the muffler on your saw is fitted with a spark arrestor mesh this must be cleaned regularly. Always wear safety goggles for eye protection. Don’t show me this message again.